Jet

Cast iron blade wheels

Cast iron tilting table (-10° to +45°)

Locking rip fence

Point cutting attachment

T-slotted mitre fence

Fully interlocked doors

Electro-mechanical motor brake

Blade tension and tracking controls

Optional mobile base

Blade length 3124mm,

Overall L x W x H 800 x 950 x 1850mm, 
Blade speed 900m/min,
Power Input 1100W (240V)
Min/max blade (W) 3mm/32mm, 
Extraction outlet 100mm (x2), 
Table height 890mm, 
Max width of cut 405mm,
Table size 430 x 430mm, 
Table tilt -10° to +45°, 
Max depth of cut 250mm, 
Nett weight 130kg, 
Wheel diameter 420mm.

JWL - 34 LX

Large cast-iron table with polished surface
Full enclosed welded steel base
Accurate spindle height adjustments are possible with the large handwheel
Interchangeable spindle with 30mm shaft and router bit collets are provided
Micro-adjustment fence features a 100mm dust port
Column guides to hold down the workpiece
V-belt for easy change of speed
Easy-to-read speed display through window
Spindle indexing for operator friendly tool change

Spindle speed 6000/8500rpm 
Table height 830mm 
Table size 540x635mm Max. tool dia. 180mm 
Spindle dia. 30mm R/bit collet size 8 & 12mm 
Spindle stroke 80mm Motor (240V) 2000W 
Clamped height 70mm 
Table opening 160mm Weight 145kg

JPT 260 & 310

Both tables open for complete access and changing from planing to thicknessing in seconds
1120mm (JPT-260) / 1400mm (JPT-310) long castiron jointer tables
Feed can be switched on/off
Large compound fence, tiltable 45° 
100mm dust port for extractor
3 bladed cutter block for superior finish
Adjustable infeed/outfeed tables lift in one easy action

Cuts per minute 15900 16500 

Cutterblock diameter 70mm 70mm 
Cutterblock speed 5300rpm 5500rpm 
Dust extraction outlet 100mm 100mm 
Feed speed 5.5m/min 7m/min 

Knives (resharpenable) HSS x3 HSS x3 
Max depth of cut (p / t) 3mm / 4.5mm 3mm / 4.5mm 
Max planing width 256mm 307mm 
Max thicknesser capacity 225mm 225mm 
Nett weight 172kg 250kg 
Length of table 1120mm 1400mm 
Power Input 1700W Input 2.2kW

Saw Bench Jet JTS 315S

Powerful, large capacity saw bench for site and workshop use
Legs fold up for transport and storage 
Wheels and folding handles aid portability 
315mm TCT blade gives 90mm depth of cut
Rear extension supplied as standard, optional right hand extension 
Sliding table for accurate cross cutting, angled or straight
Supplied with 36T TCT blade, dust extraction hose and service tools 

Specification 
Blade Tilt 0° - 47° 
Max Depth of Cut @ 45deg 60mm 
Max Depth of Cut @ 90deg 90mm 
Max Rip Capacity with Extension 860mm 
Max Ripping Width 310mm 
Nett Weight 50kg 
Overall L x W x H 900 x 820 x 1,030mm 
Power Input 2.2kW 
Table Size 550 x 800mm 
Table Size With Extensions 1,100 x 1,600mm 
Blade Dia/Bore 315mm/30mm

Saw Bench JTS 400

A compact 10" sliding table panel saw for the smaller workshop, robustly built and well featured. With a 1,000 x 255mm sliding table complete with outrigger table this will handle most sizes of board material. With a powerful motor and an 80mm max depth of cut using the standard 250mm 40T blade this machine is able to handle most jobs a small workshop or keen home user will demand. Easily made mobile with an optional wheeled base.

Blade Dia/Bore 250mm/30mm 
Blade Tilt 0° - 45° 
Dust Extraction Outlet 100mm 
Max Depth of Cut @ 45deg 59mm 
Max Depth of Cut @ 90deg 80mm 
Max Width of Cut with Fence 610mm 
Power Input 2.6kW 
Table Size 650 x 350mm

Belt Sander Jet 31A

This is a heavy duty, floor standing belt disc sander made from high grade cast iron on a substantial pressed steel stand. The finely ground cast iron tables adjust easily, never leaving any gap between the table and the abrasive that can grab the work or make the machine unsafe for use. The disc sander has a T-slotted mitre fence for added safety and greater accuracy with the table tilting from 15° in one direction to 45° in the other. The sturdy cabinet base incorporates the on/off switch and the 100mm single dust extraction outlet. The addition of the 708118 mobile base will allow the machine to be easily manoeuvered around the workshop. The belt sander can be used in either the vertical or horizontal position. With cast iron table, the accuracy is excellent and it also accommodates the T slotted mitre fence. Supplied complete with sanding disc, sanding belt and mitre fence.

Belt Size 150 x 1,220mm 
Diameter of Disc 300mm 
Dust Extraction Outlet 100mm 
Nett Weight 124kg 
Overall L x W x H 1,400 x 530 x 705mm 
Power Input 1,100W

Bobbin Sander JBOS5

A very versatile sander with oscillating bobbin and tilting table ideal for all manner of finishing tasks in the workshop. The oscillating motion of the bobbin prevents burning of the work as well as spreading the wear along the length of the abrasive. The cast iron table can be tilted up to 45° to allow for sanding of angled surfaces. There is a 100mm dust outlet provided at the rear of the machine for use with a fine dust extractor. Supplied with 50mm, 38mm, 16mm, 12mm and 6mm bobbins and loadings. Also available as an additional accessory is a 76mm diameter bobbin, which will require an accompanying table insert.

Height of Bobbins 150mm
Max Cap @ 90 110mm 

Nett Weight 35kg 
Power Input 650W 
Speed 1,425rpm 
Table Height 470mm 
Table Size 370 x 370mm 
Dust Extraction Outlet 100mm