Jet Machines

• Cast iron blade wheels
• Cast iron tilting table (-10° to +45°)
• Locking rip fence
• Point cutting attachment
• T-slotted mitre fence
• Fully interlocked doors
• Electro-mechanical motor brake
• Blade tension and tracking controls
• Optional mobile base

Blade length 3124mm,
Overall L x W x H 800 x 950 x 1850mm,
Blade speed 900m/min,
Power Input 1100W (240V)
Min/max blade (W) 3mm/32mm,
Extraction outlet 100mm (x2),
Table height 890mm,
Max width of cut 405mm,
Table size 430 x 430mm,
Table tilt -10° to +45°,
Max depth of cut 250mm,
Nett weight 130kg,
Wheel diameter 420mm.

• Large cast-iron table with polished surface
• Full enclosed welded steel base
• Accurate spindle height adjustments are possible with the large handwheel
• Interchangeable spindle with 30mm shaft and router bit collets are provided
• Micro-adjustment fence features a 100mm dust port
• Column guides to hold down the workpiece
• V-belt for easy change of speed
• Easy-to-read speed display through window
• Spindle indexing for operator friendly tool change

Spindle speed 6000/8500rpm
Table height 830mm
Table size 540x635mm Max. tool dia. 180mm
Spindle dia. 30mm R/bit collet size 8 & 12mm
Spindle stroke 80mm Motor (240V) 2000W
Clamped height 70mm
Table opening 160mm Weight 145kg

• Both tables open for complete access and changing from planing to thicknessing in seconds
• 1120mm (JPT-260) / 1400mm (JPT-310) long castiron jointer tables
• Feed can be switched on/off
• Large compound fence, tiltable 45°
• 100mm dust port for extractor
• 3 bladed cutter block for superior finish
• Adjustable infeed/outfeed tables lift in one easy action

JPT-260 JPT-310

Cuts per minute 15900 16500
Cutterblock diameter 70mm 70mm
Cutterblock speed 5300rpm 5500rpm
Dust extraction outlet 100mm 100mm
Feed speed 5.5m/min 7m/min

Knives (resharpenable) HSS x3 HSS x3
Max depth of cut (p / t) 3mm / 4.5mm 3mm / 4.5mm
Max planing width 256mm 307mm
Max thicknesser capacity 225mm 225mm
Nett weight 172kg 250kg
Length of table 1120mm 1400mm
Power Input 1700W Input 2.2kW

• Powerful, large capacity saw bench for site and workshop use
• Legs fold up for transport and storage
• Wheels and folding handles aid portability
• 315mm TCT blade gives 90mm depth of cut
• Rear extension supplied as standard, optional right hand extension
• Sliding table for accurate cross cutting, angled or straight
• Supplied with 36T TCT blade, dust extraction hose and service tools

Specification
Blade Tilt 0° - 47°
Max Depth of Cut @ 45deg 60mm
Max Depth of Cut @ 90deg 90mm
Max Rip Capacity with Extension 860mm
Max Ripping Width 310mm
Nett Weight 50kg
Overall L x W x H 900 x 820 x 1,030mm
Power Input 2.2kW
Table Size 550 x 800mm
Table Size With Extensions 1,100 x 1,600mm
Blade Dia/Bore 315mm/30mm

A compact 10" sliding table panel saw for the smaller workshop, robustly built and well featured. With a 1,000 x 255mm sliding table complete with outrigger table this will handle most sizes of board material. With a powerful motor and an 80mm max depth of cut using the standard 250mm 40T blade this machine is able to handle most jobs a small workshop or keen home user will demand. Easily made mobile with an optional wheeled base.

Blade Dia/Bore 250mm/30mm
Blade Tilt 0° - 45°
Dust Extraction Outlet 100mm
Max Depth of Cut @ 45deg 59mm
Max Depth of Cut @ 90deg 80mm
Max Width of Cut with Fence 610mm
Power Input 2.6kW
Table Size 650 x 350mm

This is a heavy duty, floor standing belt disc sander made from high grade cast iron on a substantial pressed steel stand. The finely ground cast iron tables adjust easily, never leaving any gap between the table and the abrasive that can grab the work or make the machine unsafe for use. The disc sander has a T-slotted mitre fence for added safety and greater accuracy with the table tilting from 15° in one direction to 45° in the other. The sturdy cabinet base incorporates the on/off switch and the 100mm single dust extraction outlet. The addition of the 708118 mobile base will allow the machine to be easily manoeuvered around the workshop. The belt sander can be used in either the vertical or horizontal position. With cast iron table, the accuracy is excellent and it also accommodates the T slotted mitre fence. Supplied complete with sanding disc, sanding belt and mitre fence.

A very versatile sander with oscillating bobbin and tilting table ideal for all manner of finishing tasks in the workshop. The oscillating motion of the bobbin prevents burning of the work as well as spreading the wear along the length of the abrasive. The cast iron table can be tilted up to 45° to allow for sanding of angled surfaces. There is a 100mm dust outlet provided at the rear of the machine for use with a fine dust extractor. Supplied with 50mm, 38mm, 16mm, 12mm and 6mm bobbins and loadings. Also available as an additional accessory is a 76mm diameter bobbin, which will require an accompanying table insert.